View DLH0835_7716987.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

page 1 lite max dlf/DLH0835 v2 sunlight readable 8.4? led b/l lcd user manual (1 s t editi o n 2 0 1 2/3/ 2 3) all inform ation is subject t o change without notice. approved by checked by prepared by for more informa t ion: a z d i s p l a y s , i n c . 75 columb i a , a l iso vi ejo , c a 92656 p h o n e : (949 ) 3 6 0 5 8 3 0 e - m a i l : sale s@a z d i sp l a y s.co m we bs i t e : w w w . a z d i spla ys.co m
page 2 record of revision version and date page old description new description remark mar,23,2012 all initial release
page 3 contents record of r evision .................................................................................................. 2 contents....................................................................................................................... .... 3 1.0 general d escription ......................................................................................... 4 2.0 input te rminals.......................................................................................................... 6 3.0 electrical ch aracteris tics ......................................................................................... 9 4.0 timing characterist ics of input signals ................................................................11 5.0 input signals, basic display colors and gray scale of each color ................... 12 6.0 optical spec ification...................................................................................... 13 7.0 led driving boar d specificat ions .............................................................. 16 8.0 ad5621gd specification (DLH0835 v2 only) .................................................. 19 general desc riptio n ...................................................................................................... 19 supported timing (*by your panel reso lution) ........................................................... 20 outline dime nsions ...................................................................................................... 22 pin defi ne ................................................................................................................ 23 cn1: panel connector ...................................................................................... 24 cn2: dvi-d input connecto r ............................................................................. 24 cn3: dvi-d input connecto r(16pin c onnector) ................................................. 25 cn4: analog rgb input c onnector(d-sub 15pin) ........................................... 25 cn5: analog rgb input c onnector(13pin connecto r) ....................................... 25 j1: power din jack(12v).................................................................................. 26 j2: power connec tor(12v ) ................................................................................ 26 j3: power co nnector(5 v) .................................................................................. 26 j4: inverter connector ...................................................................................... 26 j5,j6: fan ........................................................................................................ 26 j7: key pad ...................................................................................................... 26 j8: to audio pcb connector(audio control) .................................................... 27 j9: ambient ....................................................................................................... 27 j10: vr c onnector ............................................................................................ 27 j11: g-pro be(rs23 2)..................................................................................... 27 jp1:panel vcc............................................................................................... 27 dc characteri stics............................................................................................. 27 osd me nu...................................................................................................................... 2 8 9.0 mechanical drawing ........................................................................................ 34 10.0 precau tions ...................................................................................................... 35
page 4 1.0 general description dlf/DLH0835 v2 is a replaced model of dlf/DLH0835 v1. it is a color tft-lcd display as active switching devices with 1,000nits led backlight powered by durapixel? technology. this lcd display has a 8.4 inch diagonally measured active area with svga resolutions (800 horizontal by 600 vertical pi xel array). each pixel is divided into red, green, blue dots which are arranged in vertical stripe and this module can display 16.2m colors. 1.1 features ? sunlight readable ? led backlight ? high shock & vibration resistance ? low power consumption ? high uniformity ? low emi noise ? wide dimming ? life expectancy ? operation temperature 1.2 general specifications model ? no. ? dlf0835 ? v2 ? DLH0835 ? v2 ? description ? 8.4? ? tft ? lcd, ? led ? backlight ? 1000 ? nits, ? svga ? display ? area ? (mm) ? 170.4(h) ? x ? 127.8(v) ? brightness ? 1000 ? cd/m 2 ? resolution ? svga ? (800 ? x ? 600) ? contrast ? ratio ? 450 ? : ? 1 ? pixel ? pitch ? (mm) ? 0.213 ? x ? 0.213 ? viewing ? angle ? 130(h), ? 120(v) ? display ? colors ? 16.2m ? / ? 262k ? response ? time ? (typical) ? 35 ? ms ? sync ? lvds ? power ? consumption ? w ? dimensions ? (mm) ? 199.5(w) ? x ? 154(h) ? x ? 12.45(d) ? weight ? (net) ? 0.33kg ? 1.3 difference of v1 & v2 model bezel opening outline dimension view angle response time color contrast ratio lid dimension dlf0835 v1 175.5x133 199.5x149.5x11.6 120(h)~ 120(v) 30ms 16.2m 600:1 124x50x15 dlf0835 v2 173.4x130.8 199.5x154x11.6 130(h)~120 (v) 35ms 262k/16.2m 450:1 70x30x7
page 5 1.4 absolute maximum ratings
page 6 2.0 input terminals
page 7
page 8
page 9 3.0 electrical characteristics
page 10
page 11 4.0 timing characteristics of input signals
page 12 5.0 input signals, basic display colors and gray scale of each color
page 13 6.0 optical specification optical item symbol condition data unit note rx 0.5655 - red ry 0.3286 - gx 0.3496 - green gy 0.6036 - bx 0.1492 - blue by 0.1196 - wx 0.3041 - color chromaticity white wy 0.3453 - center luminance of white lc 1000 cd/O average la 997 cd/O uniform lu x=0 y=0 bm-7 80 test mode 1 2 3 contrast ratio cr 450 : 1 - color saturation ntsc x=0 y=0 klein k-10 54.33 test mode 1 4 x+ 65 horizontal x- 65 y+ 60 viewing angle vertical y- crR10 55 deg test mode 1 3
page 14 test ? mode ? 1 definition of viewing angle xy 2 definition of test point b a c 2 1 3 active area
page 15 3 bm-7 measurement setup : 4 klein k-10 measurement setup : ?
page 16 7.0 led driving board specificat ions 1. ? led ? application ?? ? this ? specification ? is ? applied ? to ? led ? converter ? unit ? for ? dlf/DLH0835 ? v2(1000nit) ? led ? backlight ? ? 2. ? operating ? characteristics ? ? item ? symbol ? conditions min. ? typ. ? max. ? unit ? remark input ? voltage ? vin ? ?????? 10.0 ? 12.0 ? 14.0 ??? v ? ? input ? current ? (low ? brightness) ? iinl ? vin=12v,vadj=5v ? 3 ? \\\\\? \\\\\? ma ? ? input ? current ? (high ? brightness) ? iinh ? vin=12v,vadj=0v ? ? 0.456 ? 0.377 0.319 ??? a ? ? led ? current ? (low ? brightness) ? ioutl ? vin=12v,vadj=5v ? 0.0 ? \\\\\? \\\\\? ?? arms ? ? led ? current ? (high ? brightness) ? iouth ? vin=12v,vadj=0v ? 0.172 ? 0.172 0.172 ? a ? ? working ?? frequency ?? freq ? vin=12v,vadj=0v 523 ? 550 ? 580 ?? khz ?? pwm ? frequency ? freq ? vin=12v 180 ? 200 ? 220 ? hz ?? brightness ? control ? vadj ? connection ? of ? voltage 0.5 ? \\\\\? 4.8 ??? v ? vadj 5% on/off ? control ? von/off ? normal ? operation ? 2 ? \\\\\? 5 ? v ?? output ? voltage ? vout ? vin=12v,vadj=0v ? 24.172 24.136 24.121 ??? v ?? efficiency ? ? vin=12v,vadj=0v ? 91.75 ? 91.76 ? 92.90 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
page 17 3. ? connector ? socket ? ?? ???? 3 \ 1. ? input ? connector: ? j3(jst ? s ? 8b \ ph \ sm3 \ tb ? or ? compatible ? ? pin ? no ? symbol ? description ? 1 ? vin ?? dc+12v ? 2 ? vin ?? dc+12v ? 3 ? vin ?? dc+12v ? 4 ? gnd ?? ground ? 5 ? gnd ?? ground ? 6 ? gnd ?? ground ? 7 ? brightness ? brightness ? control ?? 5v~0v ? 8 ? control ? on/off ? control ?? 0.8v(off) ?? 2~5v(on) ? ? ???? 3 \ 2 ? .output ? connector: ? j1,j2(jst ? s ? 2b \ zr \ sm3a \ tf ? or ? compatible) ? ? pin ? no ? symbol ? description ? 1 ? output ? led ? high ? voltage( ? + ? ) ? 2 ? output ? led ? low ? voltage ? ( ?\? ) ? ? ??? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
page 18 4. ? mechanical ? characteristics ? dimension: ?? 70mm*30mm*7mm input connector j3: pin1:vin pin2:vin pin3:vin pin4:gnd pin5:gnd pin6gnd pin7:brightness pin8:on/off 7mm
page 19 8.0 ad5621gd specification (DLH0835 v2 only) we developed this a/d board to support industrial high brightness and commercial applications. this a/d board has many functions. it has opt ions of external luminance sensor, a surface mounted vr button to control the bright ness, fan rotation and thermal sensor. the rev.1 has released for european rohs compliant purpose. general description ? max resolution up to wxga 60hz ? lvds output ? support panel dc5v or 3.3v, 12v output ? external fan control by software ? osd control ? inverter 0~5v dimming control ? 2wx2 audio output ? input power 12v ? analog signal input (rgb) ? *external v.r. brightness control ? *external light sensor brightness control
page 20 supported timing (*by your panel resolution) the following table displays optim um quality modes that the lcd moni tor provides. if the other video modes are used, the monitor will stop work ing or display a poor quality picture. timming mode resolution 640x480@60hz 640x480@72hz vga 640x480@75hz 800x600@56hz 800x600@60hz 800x600@72hz svga 800x600@75hz 1024x768@60hz 1024x768@70hz xga 1024x768@75hz 1280x1024@60hz 1280x1024@70hz sxga 1280x1024@75hz wxga 1366x768@60hz
page 21
page 22 outline dimensions unit:mm
page 23 pin define
page 24 cn1: panel connector pin no. function pin no. function 1 rxo0+ 16 rxe1- 2 rxo0- 17 rxe2+ 3 rxo1+ 18 rxe2- 4 rxo1- 19 rxec+ 5 rxo2+ 20 rxec- 6 rxo2- 21 rxe3+ 7 rxoc+ 22 rxe3- 8 rxoc- 23 gnd 9 rxo3+ 24 gnd 10 rxo3- 25 gnd 11 gnd 26 gnd 12 gnd 27 panel-vcc 13 rxe0+ 28 panel-vcc 14 rxe0- 29 panel-vcc 15 rxe1+ 30 panel-vcc cn2: dvi-d input connector pin no. function pin no. function pin no. function 1 t.m.d.s. data2- 9 t.m.d.s. data1- 17 t.m.d.s. data0- 2 t.m.d.s. data2+ 10 t.m.d.s. data1+ 18 t.m.d.s. data0+ 3 t.m.d.s. data2/4 shield 11 t.m.d.s data1/3 shield 19 t.m.d.s. data0/5 shield 4 t.m.d.s. data4- 12 t.m.d.s. data3- 20 t.m.d.s. data5- 5 t.m.d.s. data4+ 13 t.m.d.s. data3+ 21 t.m.d.s. data5+ 6 ddc clock 14 +5v power 22 t.m.d.s. clock shield 7 ddc data 15 ground (for +5v) 23 t.m.d.s. clock+ 8 not connected 16 hot plug detect 24 t.m.d.s. clock-
page 25 cn3: dvi-d input connector(16pin connector) pin no. function pin no. function pin no. function 1 t.m.d.s. 7 ddc data 13 gnd 2 t.m.d.s. 8 ddc clock 14 gnd 3 t.m.d.s. 9 gnd 15 hot plug detect 4 t.m.d.s. 10 gnd 16 +5v power 5 t.m.d.s. 11 t.m.d.s. clock- 6 t.m.d.s. 12 t.m.d.s. clock+ cn4: analog rgb input connector(d-sub 15pin) pin no. symbol description pin no. symbol description 1 red analog red 9 nc +5vdc 2 green analog green 10 sgnd sync gnd 3 blue analog blue 11 ncd reserved 4 gnd reserved 12 sda ddc serial data 5 nc vga_cab 13 hsync horizontal sync 6 rgnd red return 14 vsync vertical sync 7 ggnd green return 15 scl ddc data clock 8 bgnd blue return cn5: analog rgb input connector(13pin connector) pin no. symbol description pin no. symbol description 1 scl ddc data clock 8 red analog red 2 sda ddc serial data 9 ggnd green return 3 gnd reserved 10 green analog green 4 nc vga_cab 11 bgnd blue return 5 vsync vertical sync 12 blue analog blue 6 hsync horizontal sync 13 nc +5vdc 7 rgnd red return
page 26 j1: power din jack(12v) pin no. function pin no. function 1 12vdc 2 12vdc 3 gnd 4 gnd j2: power connector(12v) pin no. function pin no. function 1 12vdc 4 gnd 2 12vdc 5 gnd 3 12vdc 6 gnd j3: power connector(5v) pin no. function pin no. function 1 5vdc 2 5vdc 3 gnd 4 gnd j4: inverter connector pin no. symbol description pin no. symbol description 1 on/off backlight on/off 5 gnd gnd 2 bright dimming adjust 6 12vdc input 12vdc 3 gnd gnd 7 12vdc input 12vdc 4 gnd gnd 8 12vdc input 12vdc j5,j6: fan pin no. function pin no. function 1 fan(+) 2 gnd j7: key pad pin no. function pin no. function 1 power key 6 menu key 2 green led 7 auto key 3 red led 8 gnd 4 left key 9 gnd 5 right key
page 27 j8: to audio pcb connector(audio control) pin no. function pin no. function 1 12vdc 5 5vdc 2 12vdc 6 volume 3 gnd 7 mute 4 gnd j9: ambient pin no. function pin no. function 1 nc 3 gnd 2 l_sensor j10: vr connector pin no. function pin no. function 1 3,3vdc 2 vr 3 gnd j11: g-probe(rs232) pin no. function pin no. function 1 5vdc 3 rxd 2 txr 4 gnd jp1:panel vcc pin no. function pin no. function 1-2 12v 5-6 3.3v 3-4 5v dc characteristics. power consumption 6 w note1 operation temperation 0~70 storage temperature -20~85 note: this value is for a/d board body.
page 28 osd menu here are some instructions for you to use the osd (on screen display). by pressing the ?menu?, you will see the below picture. timing shows resolution, h-frequency,and v-frequency of the panel.version shows the firmware control version. this 2 inform ation is not changeable by user. there are 7 sub pages insi de the osd manual, brightness, signal se lect, sound, color, image, tools, and exit. when you press ?menu? button, you enter the ?brightness? sub p age. you will see 4 selections: press ??menu?? press ??menu press ??menu?? press ??menu?? osd brightness: press ??right?? key press ?menu? once, you can go into adju st the brightness. press ?left? you can dim down the brightness to ?0?, while press ?right? you can increase the brightness to ?100?. ambient light sensor: press this icon, must to accompany with litemax ambient light sensor to auto dimming.(option) potentiometer: press this icon, adjust vr function.(option) ambient light sensor with osd offset : press this icon press ??right?? key press ?menu?? once, you can adjust min. luminance to fit your application (option) contrast: press ?menu? and ?right? you can adju st the contrast from ?0? to ?100? by pressing the ?left? and ?right?. exit: you can exit this sub menu back to normal screen.
page 29 analog: rgb/vga input digital: dvi input exit: you can exit this sub menu back to normal screen. there are 3 options for ?sound? sub page. audio volume: audio volume adjustment. mute: you can mute the speaker by pressing this option. exit: back to the normal screen.
page 30 auto color: by press this ?auto color? opti on, you can get the optimal color performance. srgb: windows standard color setting. color tempture: you can have 3 options in this selection. color tempture user color tempture_6500k color tempture_93ook ?user mode?, ?6500k? (warm color scheme), ?9300k (cold color scheme). def ault is ?user?, and inside all ?r?, ?g?, and ?b? are set ?100? exit: back to the normal screen.
page 31 go into the ?image? page, you can see below picture. auto just: pressing this option, the ad5621 will adjust the optimal frequency of horizontal and vertical. you will see ?a uto tune?.? on the screen for around 3 seconds. clock: if you are not satisfied about the autotune result, you can adjust manually by ?clock?. the screen will be ?wider? if you adjust this function. phase: if you see ?double image? on characte rs, you can adjust ?phase? to make it perfect image. hpos: you can shift the screen horiz ontally by this function. vpos: you can shift the screen vert ically by this function. exit: back to normal screen. on the ?tools? sub menu, you will see 5 icons. osd control: select this option, you will see 4 more options:
page 32 osd_time: you can selection the time of osd from 2 sec. to 16 sec. d osd_hpos: you can move the osd horizontally over the screen. osd_vpos: you can move the osd vertically over the screen. exit: back to main menu. factory_reset: by pressing this, the screen w ill be back to the factory setting on very beginning and lost all the personal settings. sharpness: you can make the characters looks sharper. dos_mode/gxf_mode: some old programs running over 640x400 and 720x400 (dos mode and graphics mode), you need to select this option manually. exit factory burn-in mode: while your vga cable is connected on the monitor, press ?menu? and left page 33 osd lock function: it is possible to lock all t he osd buttons to prevent unauthorized changes to occur by pressing ?menu? and ?right >? buttons simultaneously. you will see the ?lock? icon below on the center of the screen for 3 seconds . if any button is pushed after the lock function is initiated, the below icon will appear on the screen.' to release the osd lock, press ?menu? and ?right >?. the below icon will appear on the center of the screen for 3 seconds. now a ll osd keys are active again.
page 34 9.0 mechanical drawing
page 35 10.0 precautions handling precautions (1) the module should be assembled into the system firmly by using every mounting hole. be careful not to twist or bend the module. (2) while assembling or installing modules, it can onl y be in the clean area. the dust and oil may cause electrical short or damage the polarizer. (3) use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process. (4) do not press or scratch the surface ha rder than a hb pencil lead on the panel because the polarizer is very soft and easily scratched. (5) if the surface of the polarizer is dirty, please cl ean it by some absorbent cotton or soft cloth. do not use ketone type materials (ex. acetone), ethyl al cohol, toluene, ethyl acid or methyl chloride. it might permanently damage the polarizer due to chemical reaction. (6) wipe off water droplets or oil immediately. staining and discoloration may occur if they left on panel for a long time. (7) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap. (8) protect the module from static electricity, it may cause damage to the c-mos gate array ic. (9) do not disassemble the module. (10) do not pull or fold the lamp wire. (11) pins of i/f connector should not be touched directly with bare hands. storage precautions (1) high temperature or humidity may reduce the performance of module. please store lcd module within the specified storage conditions. (2) it is dangerous that moisture come into or contacted the lcd module, because the moisture may damage lcd module when it is operating. (3) it may reduce the display quality if the ambient temperature is lower than 10 oc. for example, the response time will become slowly, and the starting voltage of lamp will be higher than the room temperature. operation precautions (1) do not pull the i/f connector in or out while the module is operating. (2) always follow the correct power on/off sequence when lcd module is connecting and operating. this can prevent the cmos lsi chips from damage during latch-up.

▲Up To Search▲

Price & Availability of DLH0835

	To Download DLH0835 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .